Super Hard 2024 Aluminum Strip

 What is 2024 aluminum alloy

2024 aluminum alloy is a kind of high-strength duraluminum, which belongs to the Al-Cu-Mg series. It is mainly used to make various high-load parts and components. It can be strengthened by heat treatment and has medium plasticity in the quenched and just-quenched state. The corrosion resistance is not high, and anodizing treatment and painting methods are often used to improve its corrosion resistance.

It is mainly used to make various high-load parts and components (but not including stamping forgings), such as air frame, skin, ribs, spars, rivets and other working parts below 150 °C on aircraft.

2024 aluminum stripe chemical composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Other		Al
									each	total
2024	0.5	0.5	3.8-4.9	0.3-0.9	1.2-1.8	0.10	0.25	0.15	0.05	0.15	Remainder

Physical properties

Alloy	Tensile strength Rm/Mpa	Yield Strength Rp0.2/Mpa	Elongation %	Hardness/HBWα	Density (20°C) (g/cm3)
2024-t4	425	275	14	120	2.8

Main tempers

2024 aluminum strip can be produced in an annealed condition as well as various tempers – T3, T4, and T8. Some of the most common available tempers of this alloy are 2024-T351, 2024-T851, 2024-T6, 2024-T4, 2024-T3, 2024-O.

Alloy-temper	Tensile strength(ksi)	Yield strength(ksi)	Elongation(%)
2024-O	17	11	18
2024-T3	70	50	16
2024-T4	68	47	20

Application

1. Aircraft structure (skin, frame, rib beam, bulkhead, etc.)

2. Boat

3. Cruise missile prefabricated components

4. Truck wheel

5. Aircraft propeller components and various other parts

6. Aircraft siding

7. Beauty equipment

8. Notebook case

9. Gears

10. Cylinders

11. Pistons

Original source: https://www.aluminumstrip24.com/products/2024-aluminum-strip.html