显示标签为“5052 aluminum plate”的博文。显示所有博文
显示标签为“5052 aluminum plate”的博文。显示所有博文

3003 and 5052 Aluminum Alloy in Automobile Manufacturing

 5000 series deformed aluminum alloy automobile sheets are mainly strengthened by solid solution strengthening and fine grain strengthening of magnesium atoms and a small amount of solid solution and precipitation strengthening of copper atoms. This series of alloys has good formability.

When left at room temperature, the yield point is prone to prolongation (or lüders elongation), and the surface is prone to wrinkles after stamping, which affects the appearance quality of the product. The increase of iron element will significantly worsen its ductility and cold bending performance; due to the lack of bake hardening, the paint will easily soften after baking, thus affecting the dent resistance of the parts.

5052 aluminum sheet thickness.jpg

6000 series automotive aluminum sheets use silicon and magnesium as the main alloying elements (copper is also added as an alloying element in the 6111 alloy). This type of alloy relies on the precipitation strengthening of silicon and magnesium during solid solution aging as the main strengthening method. It can be heat treated and strengthened.

This type of aluminum alloy sheet has good formability in the pre-processed state and no yield point elongation. It is suitable for automobile exterior panels, and has bake hardening properties. It has high flow stress after the paint is baked, and the parts have high dent resistance; however, aging will lead to a decrease in flanging ductility and deterioration in formability.

Currently, the most commonly used aluminum alloy plates for cars are AA6016, AA6022, AA6111, AA6005, AA6009 and AA6010, AA5182, AA5754, AA5052, etc. The Audi A8 car uses 6016 alloy plates as the body panel, the Acura NSX car uses 5052 as the interior panel and the 6000 series as the exterior panel. The Jaguar XJ220 car and the GM EV1 car both use 5754 as the body covering material.

After searching the existing technology, it was found that the aluminum alloy inner panels used in automobiles are mainly 5xxx series alloys, such as 5052, 5182 alloys, etc. In terms of deep drawing performance and tensile strength, 5052 aluminum alloy is far less good than 5182 alloy. 5052 aluminum thickness for cars is not too thick.

The batteries that provide driving power for electric vehicles are called power batteries, including traditional lead-acid batteries, nickel-metal hydride batteries, and emerging lithium-ion power batteries. Currently, the world is promoting lightweight vehicles, and aluminum is a better choice. 3003 aluminum sheet is used for this aspect.

3003 h14 aluminum sheet has good formability and is mainly used as deep drawing materials. Using 3003 aluminum alloy products to make stamped parts, models, shells, etc. has many advantages such as good surface, good plasticity, and pressure resistance.


Original Source:https://www.autoaluminumsheet.com/a/3003-and-5052-aluminum-alloy-in-automobile-manufacturing.html

5052 Aluminum Plate for Yachts Building

 There are various types of yachts, which are generally divided into fresh water yachts and sea water yachts. Yachts made of aluminum alloy can meet these two needs, and make the yacht lighter.

Because fresh water is not as corrosive as sea water, 5052 aluminum plate is usually used for the small freshwater yachts. The common tempers are 5052H32 or 5052O aluminum. It is belong to Al-Mg alloy with excellent anti-rust performance.

Alu 5052 has high plasticity, good corrosion resistance, electrical conductivity, thermal conductivity, elongation and tensile strength, which can fully meet the requirements of conventional processing and high formability. Since its processing technology is mature, it has an edge in price than other alloys.

5052 aluminum plate.jpg

In addition to yachts, 5052 aluminum plate is also used for the building of fish boat and other parts of big ships. For example, 5052 aluminum tread plate is often used for the ship deck. It is also widely used in in the manufacture of aircraft fuel tanks, oil pipes, street lamp brackets and rivets,etc.

There are many 5052 aluminum sheet manufacturers in China. Haomei Aluminum is one of the biggest one. The width can be 2650mm and the thickness can be 600mm. It is one of the few domestic manufacturers that can produce ultra-wide and ultra-thick 5052 aluminum plates. Welcome to leave message below to inquire aluminum 5052 price.

In order to ensure the high quality of 5052 aluminum sheet, we have strict inspection in the following aspects:

1. uniform performance. Especially for ultra-thick plates, the performance in the thickness direction is required to be uniform, and there can be no large performance fluctuations.

2. Higher dimensional accuracy. It mainly includes thickness accuracy and width accuracy, especially the more difficult and strict thickness accuracy, which will directly affect the performance and subsequent processing.

3. Good plate shape. Plate shape includes flatness and plate convexity, both of which have a great influence on subsequent processing and are irreversible, so it is necessary to check during the production process.


Original Source:https://www.marinealu.com/a/5052-aluminum-plate-for-yachts-building.html

What Are The Aluminum Alloys Used in Cars

 With the spread of energy saving and emission reduction concept, lightweight vehicles have been quickly promoted. Aluminum alloy is one of the lightweight materials for automobiles, most of which are 5xxx Al-Mg-Si aluminum alloy. They are often used as manufacturing materials for automobile wheels, engines, chassis, and automobile bodies.

aluminium alloy used in cars.jpg

The benefits of lightweight automobile chassis in terms of fuel consumption and handling far exceed the lightweight of other parts. Automobile chassis, including steering system, suspension system, braking system and driving system, is an important component of a car, accounting for 30% of the entire car's weight.

The common aluminum alloy used in cars are mainly divided into 5xxx and 6xxx aluminum alloy for the car body and chassis:

1. After stamping, 5182 aluminum sheet has no cracks, and it is often used in car doors, car hoods, and car front and rear fenders.

2. 5083, 5754 and 5052 aluminum plate are the common alloys for automobile plates and air storage cylinder.

3. 5052 and 5083 aluminum plates are commonly used alloys for car doors.

4. Automobile wheels are mainly made of 6061 aluminum sheet, with a thickness ranging from 0.30-600mm and a width ranging from 150-2600mm. The lightweight of the wheel hub has been very mature.

5. The 5754 aluminum sheet for automobile fuel tanks has better corrosion resistance, good processing performance, excellent weldability, and easy processing and forming properties.


Original Source:https://www.autoaluminumsheet.com/a/what-are-the-aluminum-alloys-used-in-cars.html

5083 Marine Grade Aluminum

  For workboats, ferries, fishing vessels, offshore structures, and deck equipment, 5083 marine grade aluminum is valued for high strength w...