The Main Alloys of Aluminum Electronic Foil

 The entire industrial chain of electronic aluminum foil covers upstream resources and smelting (production of high-purity aluminum); midstream electrode foil manufacturing (electronic aluminum foil manufacturing, corrosion, and chemical formation); downstream electronic components manufacturing and consumption (aluminum electrolytic capacitors, electronic complete machines). About 70% of high-purity aluminum enters electronic foil industry chain.

8079 aluminum foil

Its strength can reach 90-110Mpa, the extension is 13%-18%, the cup protrusion is 6.2-7.3mm, and the surface is free of oil stains, pinholes, bumps, scratches, foreign matter wrinkles, etc. Haomei 8079 aluminum foil’s production is equipped with online pinhole detector, ultrasonic welding, meeting the slitting processing of high-end products such as battery foil, electronic foil, medicine foil, etc.

1060 and 1235 aluminum foil

With the development of the logistics industry, the demand for electronic labels is on the rise. 1060 aluminum foil and 1235 aluminum foil are high-quality raw materials for making electronic tags. Compared with ordinary electronic tags, electronic tags made of 1060 aluminum foil can last longer and are safer and more environmentally friendly.

3003 Aluminium foil

3003 electronic foil has good formability and is mainly used in deep-drawing materials. The use of 3003 aluminum alloy products for stamping parts, models, shells, etc. has many advantages such as good surface, good plasticity, and pressure resistance.

The power battery shell made of 3003 aluminum alloy has impact resistance, is not easy to break and leaks, and can meet the strength and rigidity requirements of the power battery shell, which can reduce the weight of the battery and improve the capacity density of the battery.

Haomei electronic aluminum foil production process is casting - soaking - hot rolling - pre-annealing - cold rolling - intermediate annealing - cold rolling - foil rolling - slitting - performance testing - packaging. The alloys are mainly aluminum alloy 1100,1050, 1235, 1060 and 3003. The thickness is usually 0.02-0.05 mm. Welcome to leave message below to inquire what you need.

Original Source: https://www.alumfoils.com/a/the-main-alloys-of-aluminum-electronic-foil.html

25x3 Aluminum Strip Coil

 Waste in production has been always a troublesome problem for many production enterprises. For some applications like lamp caps, transformer, shutter,etc., the use of aluminum strip coil can effectively reduce the waste and the cost. What are the popular uses of aluminum strip?

Lamp caps

Because the electrical conductivity and anti-corrosion and anti-rust performance of aluminum alloy strip is better than those of steel, it has promising prospect in lighting industry. To make an aluminum lamp cap, it needs to punch and then tap into spiral shape. The aluminum strip needs to be thin and able to withstand pressure.

3004 Aluminum strip has high mechanical strength and uniform structure and deep drawing performance, so it is widely used for this lamp holder. Haomei 3004-O aluminum alloy lamp cap material adopts hot rolling technology with good control of composition and casting and rolling process, thus ensuring good deep drawing quality and sufficient strength.

Transformer

Since the price of copper is much higher than that of aluminum, the commonly used material for transformer is aluminum strip. The main grades of transformer aluminum strips are A1060 (O), which are mainly used in the high and low voltage windings of dry-type transformers as conductive materials.

Coated aluminum strip

The color coated aluminum strip are widely used in aluminum-plastic panels, aluminum veneers, aluminum ceilings, roof surfaces, pop-top cans, electronic products and other fields because of their stable performance and strong corrosion resistance. The main two kinds of paints for color-coated aluminum strips are fluorocarbon (PVDF) and polyester (PE), of which the service life can reach 30 years.

Brushed aluminum strip

25 x 3 aluminium strip makes use of a mechanical method to depict continuous or discontinuous scratches on the surface of the aluminum strip, and then anodized to form an Al2O3 film on the surface of the aluminum strip, which is then coated, colored, and printed to form the final product. It is light, wear-resistant, corrosion-resistant, and has excellent impact resistance.

Haomei Aluminum has all these different types of aluminum strip coil with complete specifications. Welcome to leave message below to inquire what you need.

Original source: https://www.aluminumstrip24.com/news/25x3-aluminum-strip-coil.html

Aluminum 7075 Material Properties

 7075 aluminum sheet is a commonly used grade in the 7xxx aluminum alloys. Zinc is its main alloying element. The addition of magnesium to the alloy containing 3%-7.5% zinc can form MgZn2 with a significant strengthening effect, so that the heat treatment effect of 7075 aluminum is far better than that of the aluminum-zinc binary alloy.

Aluminum plate 7075 is used to manufacture a variety of structural parts, especially aerospace structural parts. It is the most widely used high-strength aluminum alloy today, ranging from the front fuselage truss of the C919 large aircraft to the mobile phone casing. What are aluminum 7075 material properties?

It is available in various heat treatment tempers: T6, T73, T76, T77. Through a large number of experimental data and theoretical analysis, on the basis of 7075-T6, the aging heat treatment process was used to successfully develop 7075-T73, which is resistant to stress corrosion. Although this material sacrifices part of its static strength, its corrosion resistance has been significantly improved.

Later, 7075-T76 was further developed, which not only obtained stronger corrosion resistance, but also sacrificed a lower static strength than 7075-T73, which improved the comprehensive properties of aluminum alloy materials and became the best corrosion-resistant aluminum alloy.

7075 alloy can be resistance welded, and the long-term working temperature of the workpiece is less than or equal to 125℃. For incomplete annealing of materials or workpieces, the specification is 290°C~320°C, and after holding for 2h~4h, it is air cooled. Complete annealing specification is (390~430)℃/(0.5~1.5)h and it should be cooled down to ≤200℃ with a cooling rate not greater than 30℃/h.

The solution treatment temperature of 7075 alloy sheet is 460℃~490℃, and the treatment temperature of aluminum sheet should be close to the lower limit, and the number of repeated treatments should not be more than 2 times, so as to prevent alloy elements from diffusing through the aluminum clad layer and reducing the corrosion resistance of the material.

AA7075 composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Zr	Ti	Standard
7075	0.40	0.50	1.2-2.0	0.30	2.1-2.9	0.18-0.28	5.1-6.1	-

Original source: https://www.aircraft-aluminium-sheet.com/a/aluminum-7075-material-properties.html

Car Aluminum 6101

 Deformed aluminum alloys for vehicles mainly include 5xxx series (Al-Mg series), 6xxx series (Al-Mg-Si series), and a small amount of 2xxx series (Al-Cg series), 7xxx series (Al-Zn-Mg series). 6000 car aluminum can be strengthened by heat treatment through the solid solution of Mg and Si and the aging precipitation of Mg2Si phase. After coating and drying, the strength is improved, and it has high dent resistance.

The 6xxx aluminum alloys is an aluminum alloy with magnesium and silicon as the main alloying elements and Mg2Si phase as the strengthening phase. The alloy has the advantages of medium strength, high corrosion resistance, no stress corrosion cracking tendency, good welding performance, unchanged corrosion performance in the welding zone, good formability and process performance.

The 6xxx aluminum alloys have 6005, 6060, 6061, 6063, 6082, 6201, 6262, 6463, 6A02, 6101,etc. At present, the 6XXX aluminum alloys used for automobile body panels mainly include 6016, 6111, and 6022 aluminum alloys. European automakers mostly use low-Cu 6016 aluminum alloys with good formability, and the United States uses more high-strength aluminum alloys 6111 and 6022.

6101 aluminum plate can be used for high-strength conductive materials. It is of 55% IACS guarantee, good corrosion resistance and weldability, used for processing high-strength busbar conductors, electrical conductors and radiator materials,etc.

Aluminum 6101 s a low alloyed Al-Mg-Si series conductive aluminum alloy. Such alloys are widely used in the field of electrical conductivity due to their high specific strength, good electrical conductivity, corrosion resistance and formability. To meet increasingly stringent engineering demands, conductive aluminum alloys need to have both high strength and good electrical conductivity.

Haomei Aluminum has all the main alloy grades of 5xxx and 6xxx aluminum alloys including 5182, 5754, 6016, 6014, 6061, 6101,etc. Our auto aluminum sheets are applicable for the ABS(auto body sheet), aluminum chassis and power system, covering car door, hood panel, truck lid, front fender, roof panel, interior door, automobile wheel hub, fuel tank, power battery shell, bus bar conductor,etc. Welcome to leave message to inquire what you need.

Original source: https://www.aluminium-auto-sheet.com/a/car-aluminum-6101.html

5086 Marine Aluminum Plate

 Generally, marine aluminium plate needs to have high specific strength and specific modulus, that is, medium strength, corrosion resistance and weldability. At the same time, it also needs to have excellent cold and hot forming functions.

Since the ship is to be subjected to various treatments of cold working and hot working, the marine aluminum plate must be easy to form without cracks, and can still meet the strength and corrosion resistance requirements after processing. In view of the above requirements of marine aluminum plate, 5083, 5086 and 5754 aluminum plate stand out among many alloy aluminum plates because of their excellent performance.

In 1940, the United States built an all-aluminum speedboat; in 1945, Japan built the "Alacase" all-aluminum patrol boat. In the 1950s and 1960s, aluminum welding technology began to appear, and the United States developed 5086 and 5456 aluminum alloy sheets and profiles. At this time, aluminum alloy ships developed in large quantities. From 1966 to 1971, the United States built 14 aluminum high-speed boats, which were the first all-aluminum warships, using 5086 aluminum alloy.

At present, the aluminum alloys used in the hull structure are mainly 5083, 5086 and 5456, which have good mechanical properties, corrosion resistance and weldability. The Norwegian Shipbuilding Association stipulates the use of 5454 aluminum alloy, and the tensile strength of its sheet is the same as that of 5086 aluminum alloy. In the United States, 5456 aluminum alloy is mainly used, but 5086-O aluminum alloy sheet and 5086-H111 aluminum alloy extrusion profile are recently used on high-speed boats.

5086 aluminum plate is a typical 5xxx Al-Mg alloy, and the magnesium content generally does not exceed 7%. Relatively speaking, the application field of 5086 aluminum plate has relatively high requirements on product performance. Therefore, its processing cost is also higher than other 5 series products.

Its tensile strength σb (MPa): ≥240, conditional yield strength σ0.2 (MPa): ≥95. It satisfies the use effect in the high-end field very well. 5086 aluminum plate has good corrosion resistance, oxidation resistance and good weldability.

In China, as one of the 5086 aluminum plate suppliers, Haomei Aluminum’s marine aluminum sheet has got the certification of CCS, ABS, DNV, LR,BV,KR. Welcome to leave message below to inquire what you need.

Original source: https://www.marine-aluminium-plate.com/a/5086-marine-aluminum-plate.html

5182 5083 Aluminum Plate for Oil and Chemical Liquid Tanker

 Tanker aluminum sheets are mainly used for oil tank trucks and chemical liquid transport vehicles. Generally, aluminum-magnesium alloys are used like 5182 and 5083 aluminium plate with high magnesium alloy content.

5182 aluminum alloy is Al-Mg anti-rust aluminum. The performance of 5182 aluminum plate is similar to that of 5A02, but because the magnesium content is slightly higher than that of 5A02, and a small amount of silicon is added, the weldability is better than that of 5A02.

5182 aluminum sheet is of flat shape, good corrosion resistance, excellent cold processing performance, medium strength, high tensile strength and yield strength. The welding performance of 5182 aluminum plate using gas welding, argon arc welding, spot welding and seam welding is good.

5083 aluminum has good corrosion resistance and stable chemical composition, and is suitable for use in various types of tankers. The application of 5083 aluminum plate to the tank car body can reduce the weight of each car by 3-5 tons, thereby reducing the inertia of the body, improving the transportation efficiency and achieving the effect of energy saving and emission reduction.

5083 aluminium alloy is a typical Al-Mg rust proof aluminum, featuring excellent welding performance and good corrosion resistance. It also has a good combination of processability and low temperature performance. 5083 alloy has good welding performance and can be welded by various welding methods, of which the strength of the weld can be equal to the strength of the annealed matrix.

Its common tempers are H112, H116 and H32. 5083 aluminium plate is generally used for the tank body, the tank head and the bulkhead of the oil tankers. The 5083-H111 aluminum plate is used for the tank body, and the 5083-O aluminum plate is used for the tank head and bulkhead.

In addition to 5182 and 5083 aluminum plates, Haomei Aluminum has other aluminum alloys for tanker truck like 5754, 5454 and 5089. Welcome to leave message to inquire what you need.

Original source: https://www.aluminium-tanker-plate.com/a/5182-5083-aluminum-plate-for-oil-and-chemical-liquid-tanker.html

Aerospace Aluminum Alloys 6063

 The reason why aluminium is so indispensable to the aerospace industry is because of high strength and weight ratio. Airframes must be strong enough to withstand the stress of takeoff and landing over time. At the same time, if the metal is too heavy, it will require more fuel consumption during flight. There fore, aluminum is often a more cost-effective option for aircraft.

Since the aerospace industry is so specialized, it's no surprise that aircraft rely on specific high-performance alloys. One well known aircraft aluminium is 7075. 7075 aircraft aluminum is known for its excellent mechanical properties as well as ductility, high strength, toughness and fatigue resistance. Other popular aerospace aluminum alloys are 6061, 6063, 2014, 5052, 7050, 7085 and 7068.

6013 aluminum alloy is one of the most advanced aluminum alloys in the world. It has excellent formability (castability, plastic formability, weldability), moderate specific strength, good corrosion resistance, superior damage tolerance,etc. Therefore it is widely used in the fields of large civil aircraft, military carrier-based aircraft, and rail transit.

6063 grade aluminum is a heat-treatable strengthening alloy with moderate strength in the AL-Mg-Si series. Mg and Si are the main alloying elements. The main strengthening phases in 6063 aluminum alloy are Mg2Si and AlSiFe. The interval time between quenching and artificial aging has a significant effect on the degree of strengthening of 6063 aluminum alloy.

Found in the finer details of an aircraft, 6063 is mainly used for aesthetic and architectural finishes. It is used primarily for intricate extrusions. The common states of 6063 grade aluminum plate include O state, T4 state, T6 state and T5 state. The alloy in T651 state is formed by stretching on the basis of T6 state and eliminating internal stress, which is more suitable for processing and forming.

6063-T6 is used for occasions where the strength is not so high, and the main form is generally aluminium plate and bar; the main form of 6063-T5 is extruded profiles of various shapes, which is commonly used in building aluminum alloy doors and windows, curtain walls, industrial frame structures.

Original Source:https://www.aircraftaluminium.com/a/aerospace-aluminum-alloys-6063.html

6016 Aluminum Used in Automotive Industry ​

 Since aluminum alloy has the characteristics of light weight, wear resistance, corrosion resistance, high specific strength, good impact resistance, easy surface coloring, etc., and more than 80% of aluminum can be recycled and reused, it has been an ideal lightweight material for automobiles.

Since the 1970s, developed countries in the automobile industry such as Europe, America and Japan have invested a lot of manpower and material resources in the development to develop 6xxx aluminium used in automotive industry and successively developed and registered international aluminum alloys such as 6009, 6010, 6016, 6111, and 6022.

6000 aluminum alloys are heat-treatable-strengthened aluminum alloys with high strength, good plasticity and excellent corrosion resistance. 6-series alloys are the main force of body panels. The yield strength and tensile strength of the 6xxx T4 aluminum plate is similar to the steel plate and its hardening coefficient even exceeds that of the steel plate.

6009, 6010 and 6016 aluminum alloys are currently used for exterior and interior panels of automobile bodies due to their good plasticity and the ability to achieve high strength through artificial aging during the paint-baking process after forming. The body panels of the Audi A8 are made of this series of aluminum alloys.

6016 aluminum alloy is is widely used in ABS, but the heat treatment process is complicated, and pre-aging treatment T4P must be performed between solution treatment and paint treatment to obtain good performance. Because it should have good formability before stamping, and can rapidly increase the strength during the paint baking process after stamping, so as to have high dent resistance.

Al6016 is also used to make anti-collision beam. Compared with the steel plate front anti-collision beam assembly, the use of 6016 aluminum alloys to manufacture the front anti-collision beam not only greatly reduces the weight, but also improves the anti-collision effect. Welcome to leave message inquire automotive aluminum sheets you need.

Original Source:https://www.autoaluminumsheet.com/a/6016-aluminum-used-in-automotive-industry.html

5052 Marine Grade Aluminium for Shipbuilding

 Aluminum alloy has low density, non-magnetic and good low temperature performance. Using it as the structural material of the ship can reduce the weight of the ship, increase the load capacity, and improve the stability and speed. Therefore, for all kinds of small and medium-sized ships, especially hydrofoils, hovercraft, and small military ships, it is a development direction to choose it as the shell material.

5052 marine grade aluminum is a typical 5xxx aluminum alloy and the Mg content is 2.2%-2.8%. It has the characteristics of light weight, medium strength, good corrosion resistance and weldability, and easy processing and forming, etc. Its tensile strength can reach 215-265Mpa.

5052 aluminum plate is mainly used in the hull of yachts and ship parts like decks, portholes, gangways, chimney,etc. Because its magnesium content is higher than other alloys, the anti-rust function is very good, which is also an important reason why 5052 marine aluminum plate is applied to the hull.

Magnesium has high strength, anti-rust function and corrosion resistance, which can well cope with the corrosion of seawater and fresh water. The material of freshwater lake yachts is generally made of 5052 aluminum plate, and the state is H32/O, which because it is in contact with fresh water and its corrosion is not as strong as that of sea water.

The aluminum consumption of the "Liaoning" aircraft carrier is estimated to be about 650t, and the alloys are mostly 5052 and 6063. As early as 1933, the United States used 5052 alloy to manufacture bridges, deck cabins, aircraft launch pads, elevators, masts, etc. of aircraft carriers, destroyers, cruisers, etc.

Haomei Aluminum 5052 has been certified by China Classification Society (CCS), Det Norske Veritas (DNV), American Bureau of Shipping (ABS), Bureau Veritas (BV), British company (LR), which was loved by the Philippines, Myanmar, Vietnam, Thailand, Indonesia and other Southeast Asian and North American shipbuilding markets. Welcome to leave message below to inquire aluminium 5052 price.

Original Source:https://www.marinealu.com/a/5052-marine-grade-aluminium-for-shipbuilding.html

Aluminium 5083 Rolled Plate

 As an important logistics equipment, tank trucks are widely used in the automobile transportation industry. For oil tankers, the weight of the tank accounts for a large proportion of the weight of the whole vehicle, and reducing the weight of the tank contributes to the lightweight of vehicle. Tanker aluminum sheets are mainly used for tank trucks of oil and chemical liquid. Aluminium 5083 rolled plate and 5182 aluminum plate are the common choices.

At present, most manufacturers mainly use 5083 aluminum alloy sheet as the tank material, while the use of 5182 sheet can better reflect its corrosion resistance and welding performance. Under the condition of the same loading quality, the wall thickness of the tanker made of 5182 aluminum can be thinner and the dead weight is lighter.

5083 aluminum sheet belongs to the series of hot rolled aluminum plate. Hot-rolled billeting can weld some of the defects of the ingot, such as porosity, shrinkage cavities and intergranular micro-cracks, without causing internal structural defects in subsequent processing. The hot-rolled aluminum plate has good surface quality, strong mechanical properties and ductility, and good anodizing effect.

5083 aluminum plate also has very good welding properties. According to ESAB (a major international welding equipment manufacturer), compared with other aluminum alloys, 5083 only loses 7% of its tensile strength around the weld zone, and 5052 loses 19% to 36% after welding. tensile strength. Heat-treated alloys such as 6061 may lose about 80% of their tensile strength around the heat-affected zone of the weld bead.

Both the 5754 aluminum plate and the 5083 cast aluminum plate belong to the aluminum-magnesium alloy aluminum plate. The main difference between the two is the magnesium alloy content, hardness and elongation. The magnesium alloy content of the 5754 aluminum plate is around 3%, and the magnesium alloy content of the 5083 aluminum plate is as high as 4.5%. Welcome to leave message below to inquire what you need.

Original Source:https://www.aluminumtankerplate.com/a/aluminium-5083-rolled-plate.html

Los usos del aluminio 3104

 El Serie 3000 aluminio también se denomina aleación de aluminio y manganeso. El contenido del elemento manganeso es 1-1.5%. Es una serie de aleación de aluminio antioxidante ampliamente utilizada. La resistencia de la aleación de aluminio de la serie 3 es mayor que la de la aleación de aluminio puro.

Aunque no se puede tratar térmicamente para fortalecer el rendimiento, la aleación de aluminio 3000 tiene buena plasticidad después del proceso de recocido y trabajo en frío. Debido a su buena resistencia a la corrosión y rendimiento de soldadura, se puede utilizar en muchas industrias, como la industria de la decoración de edificios, la industria de fabricación electrónica, la fabricación de automóviles, etc. , placa de aluminio 3105, etc.

Panel posterior del televisor LCD

La aleación 3104 y la aleación 3004 tienen una composición muy similar, tienen una alta resistencia y son fáciles de procesar. En la industria de fabricación de televisores, las placas de aluminio 3104-O se utilizan a menudo para hacer backplanes de televisores LCD. Después de la formación y la oxidación, se puede formar una película densa de óxido, que no solo es resistente a la corrosión y la oxidación, sino también un buen aislamiento.

Material de la tapa de la botella

Las tapas de botellas son una necesidad común en la vida de los residentes. Por ejemplo, las tapas de vino, las tapas de leche en polvo, las tapas de té, etc. se procesan con materiales de tapas de botellas, pero existen altos requisitos para el procesamiento de materiales de tapas de botellas, como las propiedades de estampado, etc. Los principales grados de aleación de botella los materiales de tapa son 1060, 8011, 3105, 3104, etc., y los estados principales son H14, H16, H18, etc.

Latas

Las latas se originaron en los Estados Unidos y prevalecieron en los Estados Unidos. Hay dos materiales para hacer latas: uno es aluminio y el otro es hojalata. Para la protección del medio ambiente, el material de las latas suele ser el aluminio.

La tapa de la lata se forma mediante el estampado de una tira de aluminio con un punzón, y la lámina de aluminio se deforma plásticamente para obtener la forma geométrica de la tapa de la lata. La parte estampada tiene las características de peso ligero, alta resistencia y buena rigidez. El aluminio 3104 es una aleación de aluminio deformado con resistencia a la corrosión, alta resistencia a la tracción, buena conformabilidad y excelente elongación. Es adecuado para la embutición profunda para reducir el consumo de material.

Fuente original: https://www.placadealuminio.es/a/los-usos-del-aluminio-3104.html

An Overview of Aluminum Siding Trim Coil

 The aluminum siding trim coil refers to the the product that the surface of the aluminum coil is coated with various colors of paint after the aluminum coil has been cleaned, chrome-plated, rolled, baked and other processes.

What are uses of color coated aluminum coil

Because of its light texture, bright color, easy processing and anti-rust performance, it is widely used in thermal insulation panels, aluminum curtain walls, roofing systems and aluminum ceilings, etc. There are rich colors and patterns for customers to choose from.

The structure of aluminum trim coil

It has two different processing ways: surface coating paint and primer. According to the different raw materials of the coating paint, it is divided into polyester (PE) coated aluminum coil and fluorocarbon (PVDF) coated aluminum coil. There are also cases where one side is coated with fluorocarbon and the other side is coated with polyester.

The coating thickness of aluminum siding trim coil can be divided into single coating (4μm-20μm), double coating (25μm-28μm) and 3 coating (35μm-38μm).

Features of Haomei coated aluminum coil

1. Good temperature resistance. The melting point of aluminum is 660 degrees, so the general temperature cannot reach its melting point.

2. Environmental protection and no color fading. The active chemical molecules are stable, easy to recycle and meet the environmental protection requirements.

3. The surface oxide film is dense, with strong adhesion, oxidation resistance, acid resistance, alkali resistance, corrosion resistance, decay resistance and ultraviolet resistance.

4. Uniform and long-lasting color. Haomei aluminum trim coil avoids the color difference of traditional spraying.

Popular alloys of coated aluminum coil stock

5052 aluminum coil stock is of high strength and can be stamped and bent to form color aluminum roofing sheet. As the base material of the color coated aluminum coil, 5052 aluminum coil features clean and tidy surface, no oil stains, no black spots, no stick marks, bright surface color, good coloring performance,etc.

Therefore, 5052 color-coated aluminum coils can be used as thermal insulation decoration for the roofs of large shopping malls, playgrounds, villas and some special environments. In addition, 5052 aluminum coil is also widely used in the field of transportation and packaging.

Original Source: https://www.alumhm.com/a/an-overview-of-aluminum-siding-trim-coil.html

5754 5182 Automotive Aluminum Sheet

 At present, aluminum alloys for automobiles can be basically divided into die-casting aluminum alloys and deformed aluminum alloys, among which die-casting aluminum alloys are the main ones, accounting for about 66%.

Deformed aluminum alloys can be divided into rolled sheets (18%), extruded profiles (11%) and a small amount of forgings (5%). Automotive aluminum sheets are mainly used for body panels, including four doors and two covers (front and rear doors, hood, trunk lid), roof, fenders, etc.

Deformed aluminum alloys for vehicles mainly include 5xxx Al-Mg, 6xxx Al-Mg-Si and 7xxx Al-Zn-Mg. Among them, 5000 series aluminum alloys cannot be strengthened by heat treatment and have excellent formability. However, after forming, the yield point is likely to be extended and the surface will wrinkle.

5754 aluminum sheet belongs to Almg3. The magnesium alloy content is higher than that of the 5052 aluminum plate. 5754 aluminum plate is a medium-strength aluminum alloy plate with a magnesium alloy content of 2.6-3.6, with good rust and corrosion resistance. It has anodized surface with no color difference, excellent processability, excellent corrosion resistance, high fatigue strength, high weldability and moderate static strength, and is widely used in welded structures, storage tanks, pressure vessels, ship structures and offshore facilities, automobile manufacturing , transportation tanks, etc.

Due to the advantages of hardness and tensile strength, it has been used in a large amount in high-speed rail barrier panels in recent days. Usually 5754 aluminum plate will be processed into H111 or HO temper by annealing, because bending can only be done in this state. Of course, its price is higher than 5052 aluminum alloy plate.

Aluminum 5182 and 5754 are non-heat treated work-hardening Al-Mg alloys, mainly used for body structural parts and inner panels. The secondary phases in the alloys are Fe-rich and Mn-rich phases.

Undeformed Aluminum 5182 contains higher secondary phases and larger particle size than 5754 aluminum sheet. The percentages of the second phase in 5754 and 5182 were 0.60 % and 0.98 %, respectively. Welcome to leave message below to inquire what you need.

Original Source:https://www.autoaluminumsheet.com/a/5754-5182-automotive-aluminum-sheet.html

Marine Grade Aluminum Diamond Plate

 Marine grade aluminum diamond plate is an aluminum plate with a pattern on the surface, which has long been used in large, medium and small passenger ships, cruise ships, motorboats, high-speed missile boats, patrol boats, destroyers, fishing boat, etc. It has good anti-skid effect, strong anti-rust ability and light weight.

The advantages of 5083 aluminum sheet used in the marine field lie in its high strength, excellent corrosion resistance, plasticity and excellent welding performance. In the 1960s, with the advancement of technology, the production cost of aluminum sheet was gradually reduced and it was widely used as a lightweight material. It was used to make yacht shells, hull superstructures, masts, and port infrastructure.

5083 aluminum diamond plate is a representative product of aluminum tread plates. It features high hardness, strong corrosion resistance and good rust prevention effect, of which the hardness has obvious advantages in similar products. It can be well adapted to the occasions of high strength and high corrosion resistance, and has a good application effect on ships, vehicles and working platforms.

Magnesium element is added to this series during processing. The magnesium alloy content of 5083 aluminum plate is as high as 4.5%. At the same time, the hardness of 5083 aluminum plate is higher than that of 5754 aluminum plate. Of course, 5083 aluminum plate price is relatively high.

At present, the commonly used 5083 aluminium diamond plate is 5 bar aluminum tread plate. Since the pattern on the surface of the aluminum plate is arranged in relatively parallel according to five concave and convex patterns, and each pattern presents an angle of 60-80 degrees with other patterns, so this pattern has excellent anti-slip performance.

Haomei Aluminum has the main kinds of marine grade aluminum tread plates including 5052, 5083, 5086 and 6061. Welcome to leave message below to inquire what you need. All of our marine aluminum sheets are certificated by the classification society.

Original Source:https://www.marinealu.com/a/marine-grade-aluminum-diamond-plate.html

5083 Alloy for LNG/Fuel/Air Storage Tank

 No matter what kind of aluminum alloy it is, its mechanical properties increase with the decrease of temperature, so aluminum is a wonderful low-temperature structural material. 5083 alloy is a typical one, which is widely used for rocket low-temperature fuel (liquid hydrogen, liquid oxygen) storage tanks, liquefied natural gas (LNG) tanks, low-temperature chemical product containers, fuel tankers,etc.

Under the global background of green environmental protection, the tanker manufacturing industry has gradually chosen the lightweight development. 5083 aluminum alloy is mainly used instead of traditional steel.

5083 aluminum plate is an Al-Mg aluminum alloy. It has excellent corrosion resistance, good processing performance and welding performance. At the same time, the aluminum alloy itself is light in weight and high in specific strength. In addition to manufacture fuel and LNG tank, it is also used for making air storage tank.

The air storage tank is an important part of the braking system of heavy trucks, which is used for energy storage, filtration, voltage stabilization and cooling. There are many places where gas is used on trucks, ranging from the whistle to the brakes. If there is no air storage tank, the air volume pumped by the air compressor alone is not enough.

We all know that the air contains a lot of dust and water molecules, as well as the oil pumped in due to the failure of the air compressor. If it enters the air path of the vehicle, it will easily damage the vehicle parts over time, causing certain hidden dangers to driving safety.

The air pumped by the air compressor will stay in the air storage tank for a short time. Because the relative weight of water molecules, dust and oil in the air is heavier than that of air, it will fall to the lower part of the air storage cylinder. At this time, the air reservoir plays the role of filtering again.

The 5083 aluminum plate has good forming and processing performance. After being used in automobile air storage tanks, the air storage tank will not corrode and the service life will be extended. Haomei Aluminum has other main kinds of aluminum plate. Welcome to leave message below to inquire 5083 and 5754 aluminum sheet price.

Original Source:https://www.aluminumtankerplate.com/a/5083-alloy-for-lngfuelair-storage-tank.html

Food Tray Aluminum Foil Jumbo

 Aluminum foil packaging is lightweight, flexible and easy to recycle. In addition, it is hygienic, non-toxic, and helps maintain the aroma of food. It keeps food fresh for a long time and provides protection from light, UV radiation, grease, water vapor, oxygen and microorganisms. It not only prevents food spoilage and contamination, but often improves appearance, thereby appealing to more targeted consumer groups.

Food tray aluminum foil generally uses the latest and most scientific aluminum foil surface coating treatment technology and high temperature disinfection and decontamination treatment technology. The aluminum foil containers have been used for aviation, ships, hotels and other industries.

Aluminum foil for food container is made of primary aluminum alloy and rolled through multiple processes. There are no harmful substances such as heavy metals. In the production process of aluminum foil, a high temperature annealing and sterilization process is used, so the aluminum foil can be safely contacted with food and will not contain or facilitate the growth of bacteria.

Aluminum foil has high conductivity and thermal stability. During processing and packaging, aluminum foil utensils can withstand temperature changes well. Under the high and low temperature of -20°C-250°C, the molecular structure is stable and unchanged.

Aluminum foil tray generally has a thickness between 0.03mm and 0.2mm, which can be divided into two types: wrinkled and wrinkle-free. After cold rolling or hot rolling, the aluminum foil with uniform thickness, smooth surface and no peculiar smell are further processed into foil tray. The jumbo aluminum foil chosen for making food tray is usually 8011 or 3003.

The jumbo aluminum foil has the following advantages:

1. Aluminum foil only reacts to high concentrations of acids and alkalis, otherwise it has strong corrosion resistance.

2. Aluminum foil has strong dimensional stability even in the soft state.

3. Aluminum foil can be recycled many times.

4. Aluminum foil does not absorb liquids.

5. Aluminum foil is generally more durable.

6. The efficient storage of aluminum-packaged food and beverages reduces the need for cooling, causing them to spoil more slowly.

7. In addition, the lighter weight of aluminum reduces the energy required during transportation.

Original Source: https://www.alumhm.com/a/food-tray-aluminum-foil-jumbo.html