5182 Aluminum Sheet for Pull Ring and Can Cap

 5182 aluminum sheet belongs o the Al-Mg aluminum alloy and has a wide range of applications, especially in the packaging material industry for 5182 aluminum alloy as good corrosion resistance, excellent weldability, good cold workability, and medium strength. It is especially suitable for the use in making packing can lids and pull ring.

5182 aluminum closure sheet is mainly used to make all-aluminum cans and tinplate cans lids and pull rings. Aluminum cans have the advantages of light weight, heat resistance, good conductivity, hygiene, good printing effect, and recyclability.

The amount of cans has increased sharply, and aluminum cans have an absolute dominant position in the world beverage packaging market. Especially in developed countries, in order to meet the requirements of green packaging materials, there is still huge room for development of aluminum cans. The demand for the aluminum bottle cap material will also keep increasing.

5182 aluminum alloy is a main alloy of pull ring material. With the development of the beverage industry and the replacement of old packaging materials, 5182 aluminum alloy will usher in greater applications in the packaging market.

At the same time, as an Al-Mg aluminum alloy, 5182 aluminum sheet is a non-heat-treatable alloy with good strength, corrosion resistance, and good machinability. It can also be used to manufacture aircraft fuel tanks, oil pipes, transportation vehicles, and ship sheet metal parts.

Haomei 5182 aluminum bottle cap material has the following advantages:

1. There is no peeling, bubbles, rough surface and local mechanical damage on the surface.

2. It is of good corrosion resistance, good cold workability, and medium strength.

3. The welding performance of gas welding, argon arc welding, spot welding and seam welding is very good.

The specification of 5182 aluminium sheet

Alloy	5182
Application	Can lids and pull ring
Temper	H19/H48
Thickness	0.22- 500 mm
Width	100-2650mm

Original source: https://www.hm-alu.com/a/5182-aluminum-sheet-for-pull-ring-and-can-cap.html

3105 Aluminum Sheet for Wine Cap

 3105 aluminum sheet is a typical deep drawing material. The aluminum content is up to 98%. It has higher strength compared with the 1xxx aluminum alloy. It cannot be strengthened by heat treatment, but its corrosion resistance, formability and welding characteristics are also excellent.

The excellent processability and deep drawing performance of 3105 aluminum sheet can well meet the design requirements of different bottle caps for wine. In addition, considering the internal and external environment of the wine bottle cap, the good corrosion resistance of 3105 aluminum alloy is also more prominent. As one of the common PP cap materials, what are the features of 3105 aluminium sheet?

1. Deep drawing performance. The deep drawing performance of 3105 alloy in O temper is better than that in H26 temper. The deep drawing performance of 3105 aluminum before cryogenic treatment is better than that after 24h cryogenic treatment.

2. Plasticity. 3105 aluminum sheet has highest plasticity in the annealed state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, and poor machinability.

3. Solderability. It has excellent weldability and is suitable for all existing welding techniques, of which arc welding is the best method.

4. Cold workability. Even under cold tempering conditions, the cold workability of 3105 aluminum alloy is very good. For all tempers, the bending radius of 3105 aluminum plate with a thickness of not more than 1/16 inch can range from 1/2 to 1.

5. Forgeability. If necessary, 3105 aluminum alloy can be forged in the temperature range of 950 to 700 F. Hot working can be done at 700 to 400 F.

As a special aluminum cap closure material supplier, Haomei Aluminum has rich kinds of alloys for making different kinds of caps such as 30*60 mm caps. 

Original Source: https://www.alumhm.com/a/3105-aluminum-sheet-for-wine-cap.html

What Will Affect the Aluminum Insulation Rolls Price

 There are various kinds of aluminum insulation rolls such as aluminum with Polysurlyn moisture barrier and aluminum coil with Kraft paper. They are widely used for various insulation projects like pipe insulation. Its price always fluctuate. What are the influencing factors?

1. Its own features and the raw material determine its price. On the one hand, it is affected by international and domestic supply and demand, and on the other hand, it is affected by the speed of domestic economic development and economic policies.

2. The cost of alumina accounts for most of the production cost of aluminum insulation coil. The annual gap of alumina in my country is basically 1 to 1.5 million tons. Therefore, whether the international and domestic alumina supply is sufficient and the price is high or low will directly affect the production cost of aluminum with Polysurlyn moisture barrier.

3. The aluminum coil thickness also will affect its price. The thinner the aluminum coil, the larger the consumption of paint under the same tonnage, the longer the processing time. That will add the processing cost of aluminum insulation rolls.

4. Different aluminum coil manufacturers may have different processing technology. This will not only the final quality of the aluminum coil with Kraft paper, but also influence the processing cost of aluminum insulation rolls.

5. The common alloys of aluminum insulation coils are 1060 and 3003. The 1060 aluminum coil belong to pure aluminum alloy with simple processing technology, of which its price is much lower than 3003 aluminum coil.

As a big aluminum coil manufacturer, Haomei Aluminium has rich kinds of aluminum insulation rolls. Welcome to leave message below to get the latest price.

Original source: https://www.hm-alu.com/a/what-will-affect-the-aluminum-insulation-rolls-price.html

White Aluminum Coil Stock

 The paining aluminum trim coil is to color the surface of the aluminum coil to get a better weather resistance and decorative effect. It can be in various ways, including trim around windows and doors, flashing around skylights and dormers, and hobby or household applications.

The trim aluminum coil features a smooth finish and is easy to cut, bend, and shape. It is of acid resistance, alkali resistance, corrosion resistance, chalking resistance, decay resistance, ultraviolet radiation resistance, friction resistance, etc.

The specification of white aluminium coil:

Substrates	AA1100, 3003, 3004, 3105, 5006, 5052, 8011, etc.
Thickness	0.08-1.5mm
Width	＜1800mm
Coils core diameter	150mm ,405mm, 505mm, 508mm, 510mm
Coating thickness	PVDF >=25micron POLYESTER>=18micron
Pencil hardness	> 2HB
Coating adhesive	not lower than first grade Impact: no any crack (50kg/cm, ASTMD-2794:1993)
Bend strength	>100 times
Boiling point	no any distortion and color change (in the 99 more or less 1 degree water, then cooling 2 hours)
Corrosive	surface deep in the 5% muriatic acid and 5% NaCL, interior deep in the 2% muriatic acid and 2% NaCL, after 48 hours, no change
Impact resistance	0.2-0.3mm, ≥30kg·cm >0.3mm, ≥50kg·cm
Gloss tolerance	≤5°(Gloss ≥70°) ≤10°(Glossiness<70°)

Haomei white aluminum coil stock choose quality aluminum coil. With high-performance roll coating processing technology, we can can effectively control the size accuracy and ensure uniform color and thickness. The service life can last 20-30 years. Welcome to leave message below to get the latest price.

Original Source: https://www.alumhm.com/a/white-aluminum-coil-stock.html

The Main Alloy Element of Aluminum Round Discs

The aluminum round discs are widely used in cookware, lamps,traffic signs, aluminum cans, cans head. Because of simple processing craft and good performance such as stamping, it is widely used to make aluminum pan, aluminum disk, Pizza plate, aluminum barrels,etc in South Africa, Middle East, South America and North America.

1. The common alloy

1xxx aluminum alloy: 1050, 1060,1100 and 1200

3xxx aluminum alloy: 3003

5xxx aluminum alloy: 5052

2. Temper

The common tempers are O, H12, H14, H18.

3. Surface: Mill finish, non-stick coating

4. Production process: cold rolling, hot rolling

5. Alloy element of circular aluminum plate

Chemistry Composition
Alloy	Si	Fe	Cu	Mn	Mg	Zn	Ti	Al	Cr
1050	0.250	0.400	0.050	0.050	0.050	0.050	0.030	99.5	/
1060	0.250	0.350	0.050	0.030	0.030	0.050	0.030	99.6	/
1070	0.200	0.250	0.040	0.030	0.030	0.040	0.030	99.7	/
1100	0.95		0.05-0.2	0.050	/	0.100	/	99.0	/
1200	1.00		0.050	0.050	/	0.100	0.100	99.0	/
1145	0.55		0.050	0.050	0.050	0.050	/	99.45	/

6. Common molds of aluminum metal blanks

Φ140mm、Φ160、Φ170、Φ172mm、Φ180、Φ190、Φ200、Φ204mm、Φ208、

Φ280mm、Φ240、Φ252、Φ248、Φ260、Φ265、Φ268、Φ275、Φ270、Φ275、

Φ210mm、Φ219mm、Φ215、Φ228、Φ230、Φ234、Φ240mm、Φ250mm、Φ260mm、

Φ290、Φ295、Φ300、Φ305、Φ310、Φ315、Φ320、Φ325、Φ335、Φ330mm、

Φ340、Φ350mm、Φ360mm、Φ370mm、Φ380mm、Φ390mm、Φ395mm、Φ400mm、

Φ350、Φ355、Φ360、Φ370、Φ375、Φ380、Φ390、Φ395、Φ400、Φ405、

Φ407、Φ410、Φ415、Φ420、Φ425、Φ430、Φ435、Φ440、Φ450、Φ460、

Φ620、Φ470、Φ480、Φ500、Φ510、Φ520、Φ540、Φ560、Φ580、Φ580、

Φ600、Φ635、Φ650、Φ665、Φ680、Φ710、Φ715、Φ730、Φ750、Φ760、

Φ765、Φ780、Φ810、Φ820、Φ900、Φ920、Φ950、Φ1000、Φ1100、Φ1250、Φ1300

Original source: https://www.hm-alu.com/a/the-main-alloy-element-of-aluminum-round-discs.html